The Ohmie + Pop Filter
Dual Voltage Condenser Microphone with Magnetic Pop Filter
This bundle pairs the Ohmie with the Pop Filter we designed for it. The Pop Filter snaps onto the front of the mic with magnets, so there are no clamps or goosenecks around it.
Leave the Ohmie Pop Filter on for vocals and spoken word, and when you take it off for instruments, rooms, or field recording, it sits on its own desk stand.
The Ohmie is a cardioid condenser microphone with high output, low self-noise, and a transformerless design. Its Dual Voltage switch runs the capsule at either 48V, for a natural, smooth, relaxed sound, or 80V, for a more immediate, punchy, defined sound.
- In the box: the Ohmie, the Pop Filter, Ohmie Pop Filter Desk Stand, and our custom isolation mic clip
- The Pop Filter snaps onto the Ohmie with magnets, with no clamps or goosenecks
- Comes off in a second for instruments, rooms, and field recording
- Dual Voltage: switch the capsule between 48V and 80V
- Both modes run on standard 48V phantom power, from interfaces to field recorders
- Hand-tuned, edge-terminated cardioid capsule with a low-noise, high-output transformerless circuit
- Designed and assembled in East Los Angeles
- Free shipping worldwide
- 30-day returns
- Built in East LA
What comes in the bundle: The Ohmie, the Ohmie Pop Filter with its desk stand, and our custom isolation mic clip.
Find an Ohmie near you →
Already have an Ohmie? Get the Magnetic Pop Filter, $99 →
Made to go together
Magnetic Pop Filter
Leave the Pop Filter on for vocals, or take it off for instruments and the field.
See the pop filter →
Dual Voltage
One capsule, two sounds. 48V is natural and smooth. 80V is immediate and defined, with about 5 dB more output.
How Dual Voltage works →
Studio and Field
Built-in isolation keeps stand noise out, and it runs on standard phantom power, from your interface to a field recorder.
Explore the Ohmie →Pop filter works fantastically! The magnet is super solid (and feels very distinctly Ohma) and it handles plosives as good if not better than any other pop filter I have.
Frequently Asked Questions
-
The Ohmie microphone, our custom isolation mic clip, and the Pop Filter.
-
Yes. It's the same microphone. The only difference is that the Pop Filter comes with it in a separate product box.
-
With magnets. It snaps onto the front of the Ohmie, with no clamps or goosenecks around the mic, and comes off just as quickly when you don't need it.
-
Yes. The Ohmie Pop Filter is $99 on its own.
-
No. The Ohmie runs on standard 48V phantom power. Internal circuitry generates the higher polarization voltage the capsule uses in 80V mode.
-
Whichever sounds right to you. 48V and 80V are two different sounds, not settings for particular sources, and both have plenty of headroom. Try both on the same source and keep the one you like.
-
They're two different microphone designs, both built and tuned by us in East Los Angeles. The Ohmie is a transformerless condenser with our Dual Voltage system. You shape its sound by switching the capsule between 48V and 80V.
The Ohma is a transformer-coupled condenser built around our original Debby capsule, or an active ribbon. You shape its sound with modular magnetic screens that physically change its acoustic response, and you can customize its colors, finishes, and logo. -
One year, or two years when you register your Ohmie. It's the same warranty as our Ohma microphones.
Specs
Frequency response
- 48V
- 80V
At a glance
- Directional pattern
- Cardioid
- Frequency range
- 20 Hz–20 kHz
- Sensitivity at 1 kHz, 48 V
- 32 mV/Pa
- Sensitivity at 1 kHz, 80 V
- 57 mV/Pa
- Maximum SPL for 0.5 % THD at 1 kHz, 48 V
- 138 dB
- Maximum SPL for 0.5 % THD at 1 kHz, 80 V
- 133 dB
- Equivalent noise level, A-weighted
- 8 dB-A
- Supply voltage
- 48 V phantom (P48)
- Acoustical operating principle
- Condenser, pressure gradient transducer
- Directional pattern
- Cardioid
- Frequency range
- 20 Hz–20 kHz
- Sensitivity at 1 kHz, 48 V
- 32 mV/Pa (−29.9 dBV/Pa)
- Sensitivity at 1 kHz, 80 V
- 57 mV/Pa (−24.9 dBV/Pa)
- Maximum SPL for 0.5 % THD at 1 kHz, 48 V
- 138 dB
- Maximum SPL for 0.5 % THD at 1 kHz, 80 V
- 133 dB
- Signal-to-noise ratio, A-weighted, re 94 dB SPL
- 86 dB
- Equivalent noise level, A-weighted
- 8 dB-A
- Maximum output voltage
- 16.8 dBu
- Nominal impedance
- 90 Ω
- Rated load impedance
- 1 kΩ
- Supply voltage
- 48 V phantom (P48)
- Current consumption
- 8 mA
- Output stage
- Transformerless
- Connector
- 3-pin XLR
- Dimensions
- 157 x 56.5 x 25 mm
- Weight
- 218 g
- Included
- Product box, custom isolation mic clip
Pop Filter
- Attachment
- Magnetic
- Dimensions
- 133 x 60 x 67 mm
- Weight
- 50 g
- Included
- Desk stand
Also from Ohma World
The Ohma Ribbon and Condenser
Our modular microphones, with interchangeable acoustic screens. Build one in your own colors, finishes, and logo.